IMS Booster Pumps

OPERATING DIMENSIONS

Length: 19 ft. 5 in. (5.91 m)
Width:  7 ft. 6 in. (2.29 m)
Height: 8 ft. (2.43 m)
Weight: 15,700 lbs. (7,120 kg) Approximately

THE ENGINE

Engine:  John Deere 6090
Engine Performance:  325 bhp (242bkW) @2,200 RPM int.
Fuel Capacity: 190 gal. (719 liters)
Max. Fuel Capacity:  15.9 gal/hr (60.2 l/hr)
Drive Type: Belt Drive

THE DREDGE PUMP

Type: GIW Cast Iron LLC – M 250-660-501
Discharge Diameter: 10 in. (254 mm)
Suction Diameter: 12 in. (304 mm)
Impeller Diameter: 26 in. (660 mm)
Sphere Passage: 5 in. (127 mm)
Pump Performance: 4,000 gpm (252 liter/sec) @ 170 ft. (51.8) TDH (water) @ 884 rpm
Construction:  Impeller and volute cast from high chrome Gasite iron.

STANDARD EQUIPMENT

Heavy Duty Steel Skids (fits in an Ocean Container)
Lockable Engine Enclosure
Service Water Pump
Partial Automation (throttle up / throttle down)

CUSTOM OPTIONS

Electric Powered
Full Automation (armored fiber-optic communication)
Floating Platform
Picker Crane for Maintenance
Work Lights
Custom Paint Job

OPERATING DIMENSIONS

Length: 19 ft. (5.79 m)
Width:  7 ft. 6 in. (2.29 m)
Height: 6 ft. 8 in. (2.03 m)
Weight: 13,900 lbs. (6,304 kg) Approximately

THE ENGINE

Engine:  John Deere 6068
Engine Performance:  250 bhp (186bkW) @ 2,400 RPM int.
Fuel Capacity: 190 gal. (719 liters)
Max. Fuel Capacity:  12.4 gal/hr (46..9 /hr))
Drive Type: Belt Drive

THE DREDGE PUMP

Type: GIW Cast Iron LLC – M 200-610
Discharge Diameter: 8 in. (203 mm)
Suction Diameter: 10 in. (254 mm)
Impeller Diameter: 19.21 in. (487.9 mm)
Sphere Passage: 4 in. (101 mm)
Pump Performance: 3,500 gpm (220 liter/sec) @ 140 ft. (42.6) TDH (water) @ 1170 rpm
Construction:  Impeller and volute cast from high chrome Gasite iron.

STANDARD EQUIPMENT

Heavy Duty Steel Skids (fits in an Ocean Container)
Lockable Engine Enclosure
Service Water Pump
Partial Automation (throttle up / throttle down)

CUSTOM OPTIONS

Electric Powered
Full Automation (armored fiber-optic communication)
Floating Platform
Picker Crane for Maintenance
Work Lights
Custom Paint Job

1 This represents total flow capabilities of the pump – water and solids.

2 This represents theoretical maximum solids production.  This is calculated based on 25% solids by volume and 1 complete hour cutting and pumping material.  This estimate does not take into account material properties, time used for positioning, pumping distance or elevation. Buyer should consult IMS for production estimates based specifically around their application.